Surrey, BC · Portfolio of engineering work

Emil Vu

Embedded & Electrical Engineer — motor control, firmware, and system integration.

I build things where firmware meets hardware: field-oriented motor control written from scratch, real-time systems on FreeRTOS, RF amplifiers, and custom PCBs. I hold an M.Eng. in Electrical & Computer Engineering from the University of Victoria.

Emil Vu
Now Test & Integration Engineer at Vanderlande — baggage-handling and parcel systems.

About

A short introduction

My M.Eng. thesis is MyFOC — a from-scratch Field-Oriented Control library in C/C++ for BLDC/PMSM motors, with three-phase current sensing and an impedance mode that turns a motor into a programmable spring–damper for arm rehabilitation. Before grad school, my B.Eng. capstone was a 140 W HF linear amplifier (1.8–30 MHz) for emergency communications.

In industry I built a Python test-automation framework at Avigilon (Motorola Solutions) and worked on hydrogen fuel-cell systems at Loop Energy. I now work at Vanderlande, testing and integrating the large-scale material-handling systems that move baggage and parcels through airports and depots — work that sits where embedded control, industrial automation, and systems engineering meet.

Experience

Where I've worked

Nov 2026 — Present

Test & Integration Engineer

Vanderlande · Surrey, BC

Automated material-handling systems for airports, parcel operations, and warehouses.

  • Design and execute integration, system, and customer acceptance tests for baggage-handling and parcel systems, both in the factory and on site.
  • Build test designs, cases, and scripts from system specifications, risk analysis, and customer requirements, and set up the test environments and tooling they run on.
  • Integrate components and subsystems into existing Baggage Handling Systems, coordinating integration between Vanderlande systems, suppliers, and customer systems.
  • Analyse and report test results, support root-cause analysis of integration and performance issues, and verify fixes with developers and solution architects.
  • Maintain requirements traceability from conception to delivery, and assess how software, hardware, and configuration changes affect the integrated solution.
  • Support site commissioning and the transition to operations, acting as a technical bridge between engineering, operations, and customer teams during go-live.
Sep 2025 — Aug 2026

Graduate Teaching Assistant

University of Victoria · Victoria, BC

ECE 250, ECE 299, ECE 350, ECE 355, ECE 441, ECE 455 — digital systems, embedded firmware, communications, and analog labs.

  • Validated VHDL designs on Xilinx Vivado / Digilent Nexys A7 FPGAs — adder/multiplier logic, a VGA image-processing pipeline, and a MicroBlaze soft-core + AXI system debugged via the Integrated Logic Analyzer (ILA).
  • Operated software-defined radio labs in GNU Radio on USRP and RTL-SDR hardware (AM/SSB/FM/PSK demodulation, FLEX pager decoding), as well as analog-circuits labs on the oscilloscope, function generator, DMM, and wattmeter.
  • Programmed and debugged FreeRTOS firmware on STM32F4 — tasks, queues, and software timers — including a custom EDF deadline-driven scheduler.
  • Programmed and debugged bare-metal STM32F0 in C/CMSIS: timers, EXTI interrupts, DAC/ADC, and an SPI OLED, with NE555/optocoupler PWM circuits verified against a function generator, oscilloscope, and DMM.
  • Guided students through lab procedures, marked deliverables, and helped debug their hardware and firmware one-on-one.
May 2023 — Dec 2023

System Test & Validation (Co-op)

Avigilon — Motorola Solutions · Vancouver, BC

Product: advanced security solutions with high-definition surveillance cameras and access-control systems.

  • Developed a new Python test-automation framework, improving automation efficiency by 30% and reducing testing time by 8 hours per cycle.
  • Designed and deployed 3D-printed testing jigs using Fusion 360, reducing cost by $300 per station.
  • Created test specifications from system requirements, and automated test development, maintenance, and execution for both software and hardware products.
  • Integrated test automation into the CI/CD pipeline using Jira, Bamboo, and Docker within an Agile workflow.
Sep 2022 — Apr 2023

Electrical Engineer (Co-op)

Loop Energy · Burnaby, BC

Product: high-efficiency hydrogen fuel-cell systems and batteries for commercial vehicles.

  • Assembled 10+ wiring harnesses and ran first-article inspections with root-cause analysis, driving corrective actions that improved design quality and accelerated bring-up.
  • Built a Raspberry Pi 4 + PiCAN3 Vehicle Control Unit (VCU) simulator in Python + CAN to validate controller behaviour, remove physical test benches, and shorten validation by days.
  • Co-designed a Fuel Cell Unit (FCU) simulator with swappable wiring and I/O access to test harnesses, sensors, and pumps; enforced controller-spec safety constraints and streamlined testing.
Sep 2021 — Dec 2021

Jr. Learning Technology Assistant

University of Victoria · Victoria, BC

  • Supported faculty with classroom audio-visual and lecture-capture technology across campus.
  • Migrated course content to the D2L Brightspace learning-management system.

Projects

Selected work, by year

Skills

Tools I work with

LanguagesPython, C/C++, Verilog, VHDL, MATLAB
EmbeddedFreeRTOS, STM32, BLDC/PMSM motor control, FOC, PWM, CAN, SPI, I2C, UART
Test & IntegrationTest design and execution, requirements traceability, system commissioning, root-cause analysis, industrial automation
RF & AnalogHF amplifier design, filter design (Chebyshev, π-network), LTspice
CAD / PCBKiCad, Eagle, EasyEDA, SolidWorks, Fusion 360
ToolingGit, Docker, CI/CD, Jira, Bamboo, Agile

Education

University of Victoria

2025 — Sep 2026

M.Eng., Electrical & Computer Engineering

Thesis: MyFOC — a from-scratch field-oriented control library with application in rehabilitation.

2019 — 2025

B.Eng., Electrical Engineering (with Co-ops)

Capstone: 140 W portable HF linear amplifier with band-pass/low-pass filtering for emergency communications.

Contact

Get in touch

I'm always glad to talk about embedded systems, motor control, or test and integration work — whether that's a question about one of these projects or something you're building.